1. KD200 Sample Concentration consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block. The gas at 5~10 psig passes through the distribution manifold.
2. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the height. Needles or glass pipets blow gas onto the surface of the solution resulting in evaporation of the solvent
1. KD200 Sample Concentration consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block. The gas at 5~10 psig passes through the distribution manifold.
2. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the height. Needles or glass pipets blow gas onto the surface of the solution resulting in evaporation of the solvent.
Reminder:
Professionally-designed block, tester can be observed at the surface location of concentrated samples.
Code Description
AS-06090-00 KD200 AC220V or AC120V, 50/60 Hz, 400W
AS-06081-01 130mm Needles
1. High precision and wide range of temperature control
2. Blowing a large number of samples at one time
3. Blowing each sample independently
4. Amount of airflow can be adjusted
5. Easy operation; safe and reliable to use
6. Low Nitrogen consumption of 330ml/min/sample
Temperature control range | RT+5°C~150°C |
Temperature control discrepancy | ?±1°C(RT.+5°C~100°C) |
Heating time (from 40°C to 150°C) | ?30min |
Processing timer | 1min~99h59min |
Maximum input power | 400W |
Temp. control discrepancy | 0.1°C |
Needle length | 130mm |
Capacity | 12pcs |
Overall Dimensions (LxWxH) | 280x240x500mm |
Reviews
There are no reviews yet.